Tenacious’s Foamed Acrylic Bonding Tape is double sided designed for permanent applications where a very high bond is required. Being an acrylic polymer is have a very high UV performance being UV resistant as well as a plasticiser giving good ageing properties.
It has a red PE filmic release liner suitable for die cutting.
Roll Size: 6mm to 930mm in 33 Metre Lengths
Adhesive: Acrylic Polymer
Description: A Clear 0.25mm Foamed Acrylic Tape designed for applications where a very high permanent bond is required. It has a high performance UV cured acrylic polymer. It is plasticiser and UV resistant, giving good ageing properties It has a red PE filmic release liner suitable for die cutting.
Application: Laminating to profiles and trim e.g. PVC and magnetic extrusions, but particularly low energy surfaces such as polypropylene. Nameplate mount and bonding clear and translucent plastics in the sign trade.
Technical Details:
Tape Thickness: | 0.50mm |
Elongation at Break: | 1000% |
Dynamic Shear (200mm/min, 10mm x 10mm) | |
After 30 Mins @ 80ºC | 5.3 kg/cm2 |
After 30 Mins @ -30ºC | 5.1 kg/cm2 |
After 30 Mins @ 23ºC in gasoline | 4.2 kg/cm2 |
After 24 Hours @ 23ºC | 5.2 kg/cm2 |
After 168 Hours @40ºC in saline | 5.0 kg/cm2 |
Service Temperature: | -30°C to 150°C |
Shelf Life: | 12 Months |
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.
Check out our other tapes here!
STM Studio Supplies researches and updates the product list by listening to customers and practical installation by ourselves.
To enable constant improvement all and any feedback is most appreciated.
Reviews
There are no reviews yet.